Simple Operation for monitor PH value (Low or High PH will cause the aquarium make disease)
Durable and Reliable
Ideal For Salt Water and Fresh Water
Specification
Measurement- 0~14pH
Resolution- 0.01pH
Accuracy- 0.01pH
Power for 220V to 240V 50/60Hz
Include PH Pen, calibration
Operation:
Connect the AC power (230V~50/60Hz).
Connect the PH electrode to PH terminal.
Put the PH electrode into the buffer solution with the standard PH7. Adjust the knob "CAL/PH7" with the plastic screwdriver until the display reads "7.00".
Put the PH electrode int the water after calibration and start to work.
Normally, the best PH for plant aquarium is PH6.8~PH7.2 and for the seawater aquarium is PH8.0~8.4.
It's working perfectly and I have no issue with it
00
CommentLikeDislike
Faisal Invitadoon24 Jun 2012, 1:08 AM
Accurit & very helpful
It make my life easy to know the time to change some of my tank water for better life and health for my salt water fish.
Thanks fish street
00
CommentLikeDislike
Eduardo on14 Mar 2012, 5:07 PM
I Recommend
very good procut for its price. Unfortunately the manual is not in English
00
CommentLikeDislike
Faisal on4 Dic 2011, 11:12 AM
Accurate Read
I recmmend that all tank have PH meter like this .
00
CommentLikeDislike
jordix Invitadoon8 Oct 2011, 1:58 PM
accurate
very good procut for its price, hysteresis could be more accurate (0.1 instead of .15) but still its fine, it changed my life with tank mainteinance with CO2 system installed, must say that needs monthly calibration, nothing hard to do.
as negative point only the calibration screws, mostly the ph co2 control one, are hard to set up in the desired point due to an inaccurate screw.
Thanks fish street