3/4/2014 In Stock for US / UK /EU /AU Plug
3/4/2014The Next Generation for Fish Street Brand Cross with Jebao Factory Release a FS Brand FS8000 Wave Maker. For Jebao wp36 is release on 2013 May. FS8000 which release on 2014 April.
FS8000 is based on the Forum editor, customer review on improve on the sound of the Jebao wp40
1) New Type of Design
2) Rubber Noise Reduction Rubber on the Bracket Mount
3) Silm Bracket and smaller size with wp25 must same output
Why Order Jebao Item on Fish Street Store?
1) We close with factory only 1.5 hours can visit directly
2) Only we can provides replacement sensor and Rubber Impeller / 12 24V Power Supply to variable control speed of wp-40 and Impeller Kits / Magnet Base. Both these item only can Order in Fish Street Store. Cannot search on Google or from group order), beware for out of warranty for non Authorized Distributor
Jebao Voltage Power Supply Driver (12V to 24V, Adjustable to Reduce Big Flow on Small Tank) Order Here:
Jebao Replacement Kits Download Here:
Jebo Modes
Press the 'MODE' button to cycle through the selection of functions.
H1 H2 H3: High, constant, non-variable flow (8,000 LPH /600L / 4000L)
L: Low, constant, non-variable flow at a third of the speed (4,000 LPH)
W1: Short pulses which, when timed correctly will create a back and forth motion and form a gentle standing wave in your tank. Adjust the controller to change the speed of the pulses and vary the size of the wave according to your tank.
S1 to S3 Mode: Based on the W1 Wavebox function provides 100% 75% and 50% Wave
W2 & W3: Pump gradually speeds up and slows down incrementally to create a varied flow pattern. Adjustable to form the wave best suited to your tank.
Else: Reef Stream Mode, a mixed, changing pattern that creates a random flow cycle similar to what you would find in a natural reef.
Feed: Press the 'FEED' button once, the blue '10min' light will illuminate indicating that the pump has been stopped for 10 minutes. When the time has elapsed, the light will go off and the pump will be turned back on. Alternatively, press the 'FEED' button again to start the pump.
Lock: To prevent changes from inadvertently occurring by accidentally knocking the adjustable control knob, press and hold the 'FEED' button for 5 seconds. The red 'LOCK' light will illuminate and the control knob will no longer function. Press and hold the 'LOCK' light for a further 5 seconds to disable this feature.
*Night: When the two-pinned sensor is inserted into the two small plugs on the left-hand side of the control box, Night mode will function automatically. The sensor detects when the tank lights go out and slows the pump to half speed. The 'Sensor' light will illuminate when Night mode is in operation. To disable the Night mode function, remove the sensor from the control box.
* Night mode is a new feature intended for use with low output lighting. The sensor can become damaged when used with high output VHO, HQI and LED lighting systems. Customers use the sensor with high output lighting at their own risk. The sensor is not covered by the manufacturer's warranty if used with high output lighting.
Specifications
http://www.youtube.com/watch?v=N46dR-RVxOs